Makita Hr3210c: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

Makita HR3210C Information

The Makita HR3210C is a 32mm SDS-Plus rotary hammer that is designed for a variety of applications, including drilling holes in concrete, masonry, and wood. It features a powerful 850W motor that delivers up to 5.0 joules of impact energy, making it capable of handling even the toughest jobs. The HR3210C also includes a number of features that help to reduce vibration and noise, making it more comfortable to use for extended periods of time.

Image of Makita HR3210C rotary hammer

Specifications

Feature	Spec
Motor	850W
Impact energy	5.0 joules
No-load speed	315-630 RPM
Blows per minute	1650-3300 BPM
Chuck type	SDS-Plus
Maximum hole diameter	Concrete: 4-32mm
Metal: 13mm
Wood: 32mm
Noise level	89 dB(A)
Vibration level	10 m/s²
Weight	5.2kg

Features

• AVT (Anti-Vibration Technology) helps to reduce vibration and make the tool more comfortable to use.
• Soft start prevents the tool from jerking when it is first turned on.
• Constant speed control maintains a consistent speed even under load.
• Torque limiter helps to protect the tool and operator if the bit jams.
• 24 pre-set chiseling positions for a variety of applications.
• One-touch sliding chuck for easy bit changes.
• Dust cover helps to keep the tool clean.

What's in the box

• Makita HR3210C rotary hammer
• SDS-Plus chuck key
• Dust cover
• Instruction manual

The Makita HR3210C is a powerful and versatile rotary hammer that is perfect for a variety of applications. It is easy to use and features a number of features that help to reduce vibration and noise. If you are looking for a rotary hammer that can handle even the toughest jobs, the Makita HR3210C is a great option.

Makita HR3210C Compare with Similar Item

a table comparing the Makita HR3210C with some similar items:

Feature	Makita HR3210C	Bosch GBH 2-26 DFR	DeWalt D25143K
Power	10.3 amps	10.8 amps	10.5 amps
Impact energy	32.3 joules	32.2 joules	30.8 joules
Hammering rate	4,000 blows per minute	4,000 blows per minute	4,000 blows per minute
Weight	7.1 pounds	7.4 pounds	7 pounds
Price	$169	$179	$159

As you can see, the Makita HR3210C is very similar to the Bosch GBH 2-26 DFR and the DeWalt D25143K in terms of power, impact energy, hammering rate, and weight. The Makita is slightly cheaper than the Bosch and DeWalt, but it also has a slightly lower impact energy. Ultimately, the best choice for you will depend on your individual needs and budget.

Here are some additional things to consider when choosing between these three hammers:

• The Bosch GBH 2-26 DFR has a built-in LED light, which can be helpful in dark or poorly lit areas.
• The DeWalt D25143K has a soft grip handle, which can make it more comfortable to use for extended periods of time.
• The Makita HR3210C comes with a carrying case, which can be helpful for storing and transporting the hammer.

I hope this helps!

Makita HR3210C Pros/Cons and My Thought

the pros and cons of the Makita HR3210C, along with some user reviews and my thoughts:

Pros:

• Powerful motor: The HR3210C has a powerful 1,500-watt motor that can easily handle most demolition tasks.
• Lightweight: The HR3210C is relatively lightweight for a demolition hammer, weighing in at just 12.6 pounds. This makes it easy to maneuver and use for extended periods of time.
• Vibration control: The HR3210C features Makita's AVT (Anti-Vibration Technology) system, which helps to reduce vibration and make the tool more comfortable to use.
• Dust collection: The HR3210C has a dust collection system that helps to keep the work area clean.
• Durable construction: The HR3210C is made from durable materials that can withstand the rigors of demolition work.

Cons:

• Expensive: The HR3210C is more expensive than some other demolition hammers on the market.
• Noisy: The HR3210C is quite noisy, so it's important to wear hearing protection when using it.
• Short cord: The HR3210C has a relatively short power cord, so you may need to use an extension cord if you're working in a large area.

User reviews:

Overall, users seem to be very satisfied with the Makita HR3210C. They praise the tool's power, lightweight design, and vibration control system. Some users also mention the dust collection system as a positive feature. However, a few users complain about the noise level and the short power cord.

My thoughts:

The Makita HR3210C is a great choice for anyone who needs a powerful and versatile demolition hammer. It's lightweight and easy to use, and it has a number of features that make it comfortable to operate, such as the AVT system and the dust collection system. However, it is a bit expensive, and it's important to be aware of the noise level and the short power cord before you buy it.

Overall, I think the Makita HR3210C is a great demolition hammer, and I would recommend it to anyone who needs a powerful and reliable tool for demolition work.

Makita HR3210C Where To Buy

You can buy the Makita HR3210C rotary hammer drill from the following retailers:

• Makita Direct: This is the official retailer of Makita tools, so you can be sure that you are getting genuine parts. They also offer a variety of spare parts for the HR3210C, including the tool holder cap, ring spring, chuck cover, ring, steel ball, washer, conical compression spring, cap HD screw M6X25, barrel comp, O ring 53, flat washer 34, urethane ring 34, flat washer 34, tool holder, impact bolt, O ring 15, thin washer 12, and O ring 15.
• Walmart: Walmart is a major retailer that carries a wide variety of tools, including Makita products. You can find the HR3210C rotary hammer drill in-store or online. Walmart also offers a limited selection of spare parts for the HR3210C, such as the tool holder cap, ring spring, chuck cover, ring, and steel ball.
• Amazon: Amazon is another major retailer that sells Makita tools and spare parts. You can find a wide selection of HR3210C spare parts on Amazon, including the tool holder cap, ring spring, chuck cover, ring, steel ball, washer, conical compression spring, cap HD screw M6X25, barrel comp, O ring 53, flat washer 34, urethane ring 34, flat washer 34, tool holder, impact bolt, O ring 15, thin washer 12, and O ring 15.
• Best Buy: Best Buy is a major electronics retailer that also carries a selection of tools. You can find the HR3210C rotary hammer drill in-store or online. Best Buy also offers a limited selection of spare parts for the HR3210C, such as the tool holder cap, ring spring, chuck cover, ring, and steel ball.
• Lowes: Lowes is a major home improvement retailer that carries a wide variety of tools, including Makita products. You can find the HR3210C rotary hammer drill in-store or online. Lowes also offers a limited selection of spare parts for the HR3210C, such as the tool holder cap, ring spring, chuck cover, ring, and steel ball.
• eBay: eBay is an online auction site where you can find a variety of Makita tools and spare parts, including the HR3210C. You can often find good deals on spare parts on eBay, but be sure to do your research and buy from a reputable seller.

Please note that the availability of spare parts may vary depending on the retailer. It is always a good idea to check the retailer's website before making a purchase.

Makita HR3210C Problems and Solutions

some of the common issues and problems with the Makita HR3210C hammer drill and their solutions:

• The hammer drill won't turn on. This could be due to a number of reasons, such as a dead battery, a blown fuse, or a faulty switch. To troubleshoot this issue, first check the battery to make sure it is properly inserted and charged. If the battery is good, then check the fuse. If the fuse is blown, then it will need to be replaced. Finally, check the switch to make sure it is functioning properly. If the switch is faulty, then it will need to be replaced as well.
• The hammer drill makes a loud noise. This could be due to a number of reasons, such as worn-out bearings, a loose chuck, or a damaged bit. To troubleshoot this issue, first inspect the bearings for signs of wear and tear. If the bearings are worn out, then they will need to be replaced. Next, check the chuck to make sure it is tightly secured. If the chuck is loose, then tighten it. Finally, inspect the bit for any damage. If the bit is damaged, then it will need to be replaced.
• The hammer drill vibrates excessively. This could be due to a number of reasons, such as worn-out bearings, a loose motor mount, or a damaged housing. To troubleshoot this issue, first inspect the bearings for signs of wear and tear. If the bearings are worn out, then they will need to be replaced. Next, check the motor mount to make sure it is tightly secured. If the motor mount is loose, then tighten it. Finally, inspect the housing for any damage. If the housing is damaged, then it will need to be repaired or replaced.
• The hammer drill overheats. This could be due to a number of reasons, such as prolonged use, a clogged dust port, or a dirty motor. To troubleshoot this issue, first allow the hammer drill to cool down. Next, check the dust port to make sure it is free of debris. If the dust port is clogged, then clean it out. Finally, inspect the motor for any dirt or debris. If the motor is dirty, then clean it off.

Here are some additional tips for preventing common problems with the Makita HR3210C hammer drill:

• Use the correct bit for the job. Using the wrong bit can damage the hammer drill and the workpiece.
• Don't overload the hammer drill. Overloading the hammer drill can damage the motor.
• Let the hammer drill cool down before using it again. Prolonged use can overheat the hammer drill and damage it.
• Clean the dust port regularly. A clogged dust port can overheat the hammer drill.
• Inspect the hammer drill regularly for signs of wear and tear. Catching problems early can help prevent more serious damage.

I hope this information is helpful. Please let me know if you have any other questions.

Makita HR3210C Manual

Makita HR3210C Rotary Hammer Manual

Safety Information

• Read the instruction manual carefully before using the tool.
• Always wear safety glasses when using the tool.
• Use the correct bit for the material you are drilling.
• Do not overload the tool.
• Allow the tool to cool down before storing it.
• Keep the tool clean and free of debris.

Before Use

• Check the tool for any damage before using it.
• Make sure the tool is properly assembled.
• Connect the tool to a power source that matches the voltage on the nameplate.
• Set the tool to the correct mode (hammer drilling, chiseling, or rotation only).
• Adjust the speed and/or torque settings as needed.

Troubleshooting

• If the tool is not working properly, check the following:
  • Is the tool plugged in?
  • Is the switch turned on?
  • Is the bit the correct size and type for the material you are drilling?
  • Is the tool overloaded?
  • Is the tool overheating?
• If you cannot identify the problem, or if the tool is damaged, contact Makita for service.

Maintenance

• Keep the tool clean and free of debris.
• Inspect the tool regularly for wear or damage.
• Replace any worn or damaged parts immediately.
• Do not attempt to repair the tool yourself.

Warranty

This tool is warranted to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of purchase. If the tool fails within the warranty period, Makita will repair or replace it, at its option, free of charge.

Contact Information

Makita USA, Inc. 14900 North 39th Avenue Poway, CA 92064

Phone: 1-800-462-5686 Email: [email protected] Website: www.makitatools.com

Additional Information

• The tool can be used for hammer drilling in brick, concrete, and stone, as well as for chiseling work.
• The tool has a variable speed dial and a torque limiter.
• The tool comes with a carrying case, a bit holder, and a set of SDS-Plus bits.
• The tool should be stored in a cool, dry place.
• The tool should be disposed of properly in accordance with local regulations.